EDAC / Keyboard Stand

STRATA

Layers that stack without hiding one another.

Strata: layer on layer, read as one face. STRATA sets that face on your desk.

STRATA on a living-room table: a three-tier column with only the top tray fitted, holding a keyboard

STRATA 3 · top tray only

01

Full aluminum

Base, column, tray. Aluminum throughout.

02

1 · 2 · 3 tiers

Add a column and a tray, and the stand grows by one tier.

03

Silver anodized

A low-sheen silver surface.

Configuration

Only as tall as you need

Three heights from one structure.

STRATA 1 tier, front STRATA 1 tier holding one keyboard, front STRATA 2 tiers, front STRATA 2 tiers holding two keyboards, front STRATA 3 tiers, front STRATA 3 tiers holding three keyboards, front
STRATA 1
One board. The footprint is a single base.
1 TIER · 1 TRAY
STRATA 3 tiers from the side, three trays cantilevered from the central column

Structure

One column in the middle

Each tray is held on one side and reaches out. Keyboards go in from the open side.

You choose where the trays sit, too. The top slot alone is an option.

CANTILEVER TRAY · BOLTED MOUNT

Close-up of the joint between column and tray, with two hex bolts

Finish

Chamfered edges

Exposed edges are chamfered.

Hex bolts at the joints. The front lip folds up to catch the keyboard.

SILVER ANODIZED · CHAMFERED EDGE

Close-up of tray and base, showing the folded front lip and chamfered edge

In use

Left out, not put away

Even with three boards, the lower tiers stay in view. Every tier tilts forward.

STRATA 2 tiers with two keyboards, three-quarter view STRATA 3 tiers with three keyboards, close side view